terça-feira, 8 de setembro de 2015

Canon goes resolution-crazy with a 250-megapixel sensor

 

 

Canon has developed a 250-megapixel CMOS APS-H sensor

Canon has developed a 250-megapixel CMOS APS-H sensor

 

While 50-megapixel cameras offer more than enough resolution for most people, Canon thinks you might be hankering after a bit more, 200-megapixels more to be precise, as it's just revealed a 250-megapixel sensor. The new APS-H sensor is said to be the world's highest resolution CMOS sensor for its size.

Earlier this year Canon showed it was serious about resolution when it unleashed the full-frame 5DS and 5DS R duo which pack 50-megapixel sensors. The newly-developed sensor makes those look positively low-res by offering a 250-megapixel (19,580 x 12,600 pixels) resolution, and doing so on a smaller APS-H-size (29.2 x 20.2 mm) sensor.

The increased signal volume of sensors with larger pixel counts can traditionally cause problems such as signal delays and slight discrepancies in timing, but the new sensor has an ultra-high signal readout speed of 1.25 billion pixels per second. Canon says this is thanks to advancements in circuit miniaturization and enhanced signal-processing technology.

Installed in a camera prototype, the resolution of the sensor is reported to have made it possible to read the lettering on an airplane flying 18 km (11 miles) from the shooting location, which is impressive whatever lens was being used. The sensor can also be used to record video footage at a resolution 125 times that of Full HD (1,920 x 1,080 pixels), and 30 times that of 4K (3,840 x 2,160 pixels), though only at five frames per second. This would let users crop and magnify video images while retaining Full HD or 4K resolution.

Though we don't expect to see a 250-megapixel DSLR on the shelves of our local camera store any time soon, Canon says it's considering the application of this technology in specialized surveillance and crime prevention tools, ultra-high-resolution measuring instruments and other industrial equipment.

Source: Canon

 

http://www.gizmag.com/canon-250-megapixel-sensor/39290

Citações ao cantar do galo (3:00 AM)

 

Snap 2015-09-08 at 04.55.06

segunda-feira, 7 de setembro de 2015

Compostable electronics could ease the e-waste problem

 

 

Biodegradable components could come to a store ... and then a compost heap near you

Biodegradable components could come to a store ... and then a compost heap near you (Credit: KIT)

Some day soon your obsolete gadgets could be as compostable as banana peels and spent coffee grounds. Researchers from the Young Investigator Network at Karlsruhe Institute for Technology (KIT) in Germany are developing printed electronics from natural and compostable materials that could help make a dent in the millions of tons of electronic waste piling up worldwide each year.

Instead of silicon, heavy metals and other elements that can stick around for a while, even potentially creating toxic hazards as they break down in landfills, the researchers are working with biodegradable materials including semiconductors and dyes made of plant extracts and insulators fashioned out of gelatin.

"These may not be as long-lived as the inorganic alternatives, but they easily survive the service life of disposable electronics," says Dr. Gerardo Hernandez-Sosa, leader of the Young Investigator Group of KIT.

When they're no longer needed, he says the components can be thrown in with biowaste or compost where they will rot like any other organic matter that decomposes. He notes however, that some products with the word "organic" in their names like organic light-emitting diodes (OLEDs) aren't biodegradable in the same way.

"We call all synthetic materials that are based on carbon 'organic'. But this term does not tell us anything about environmental compatibility," he explains.

Instead of using metals or metalloids like silicon, the researchers are working with carrier foils made from natural materials like starches and cellulose, similar to the recent work of a Wisconsin-based team. Hard gelatins like those used to make drug capsules can also be good for insulation.

A key part of creating fully biodegradable electronics will be developing inks for printing circuits that have all the required environmental and conductive properties and also won't plug printers, among other concerns.

Addressing this challenge is the current focus of the research team. The scientists hope to have compostable organic electronics ready for suppliers or store shelves in about three years.

 

Source: KIT

 

Uma “tesoura” digital incrível

 


 

Snap 2015-09-07 at 11.56.11

CUTOUT 4.0 permite você cortar os menores detalhes e objetos transparentes com o clique do mouse. Mesmo que o fundo seja complexo, CUTOUT 4.0 pode remover os objetos que você precisa, graças ao perfeito reconhecimento de contornos e entrelaçamento dentro e fora. Cortar com precisão nunca foi tão fácil.

Ferramentas de corte profissionais.

Ferramentas de corte profissionais.
Use chroma key para trabalhar em um nível profissional: escolha a sua cor de fundo e corte o seu objeto em um fundo monocromático com um clique do mouse. Esta técnica cinematográfica já está em uso diário em agências de modelos profissionais.

Criatividade sem limites.

Criatividade sem limites.
Com processamento de imagem em camadas, você pode colocar o seu recorte sobre uma variedade de origens e criar novas imagens de tirar o fôlego! Mostre seu mundo - com CUTOUT 4.0, você pode remover elementos únicos de suas imagens e combiná-los para composições foto-realistas.

CUTOUT 4.0 – processador de imagem completo.

CUTOUT 4.0 – processador de imagem completo.

Este software especializado para cortar os menores detalhes ficou mais abrangente do que nunca. Use CUTOUT 4.0 para processar as imagens, com uma gama de funções entrelaçadas para cortar objetos e muitas ferramentas para se adaptar a iluminação, cor e saturação de seus planos e fundos. Aperfeiçõe o resultado com diversas ferramentas para transformar e cortar suas imagens. Um programa tudo-em-um!

Retoque em imagens com problemas.

Retoque em imagens com problemas.
CUTOUT 4.0 oferece ferramentas inteligentes para remover objetos indesejados ou retocar áreas em suas imagens. Graças a ferramentas como o apagador inteligente e pincel de erro, você irá sempre encontrar a ferramenta certa para retocar as suas imagens como um profissional.

Destaques

Crie incríveis montagens trompe-l'oeil.

Remova objetos indesejados de suas imagens com o clique do mouse.

Use criativamente as áreas de foco suave em suas imagens.

Máscaras sobre os mais difíceis objetos complicados em segundos

 

 

www.ashampoo.com

Sweet hacks

 

Vitamin C: The exercise replacement?

 

 

Overweight and obese adults are advised to exercise to improve their health, but more than 50 percent do not do so. New research to be presented at the 14th International Conference on Endothelin: Physiology, Pathophysiology and Therapeutics suggests that taking vitamin C supplements daily can have similar cardiovascular benefits as regular exercise in these adults.

The blood vessels of overweight and obese adults have elevated activity of the small vessel-constricting protein endothelin (ET)-1. Because of the high ET-1 activity, these vessels are more prone to constricting, becoming less responsive to blood flow demand and increasing risk of developing vascular disease. Exercise has been shown to reduce ET-1 activity, but incorporating an exercise regimen into a daily routine can be challenging. This study, conducted at the University of Colorado, Boulder, examined whether vitamin C supplements, which have been reported to improve vessel function, can also lower ET-1 activity. The researchers found that daily supplementation of vitamin C (500 mg/day, time-released) reduced ET-1-related vessel constriction as much as walking for exercise did. Vitamin C supplementation represents an effective lifestyle strategy for reducing ET-1-mediated vessel constriction in overweight and obese adults, the researchers wrote.


Story Source:

The above post is reprinted from materials provided by American Physiological Society (APS). Note: Materials may be edited for content and length.


 

http://www.sciencedaily.com/releases/2015/09/150904144604.htm

A simple path to resilience

 

By Sheryl M. Ness, R.N. August 21, 2015

Life is a challenge. Each day brings new opportunities to learn how to manage the many things that challenge you. Building resilience and learning about practices that help protect your physical, emotional, mental and spiritual wellbeing may seem complicated. However, there are simple things that you can do to focus on your inner strength.

Here are a few ideas to get you started:

  • Move every day to increase your energy and improve your health. Talk a walk with a friend or have fun simply dancing to music for 10 minutes.
  • Make a plan to eat well by including fresh fruits and vegetables in your diet. Have healthy snacks handy and remember to drink enough water to hydrate your body.
  • Maintain your health by taking time for prevention and visiting your health care provider when recommended. Remember to listen to your body if you notice new changes that concern you.
  • Find time to relax each day to take your mind off the things you find stressful. Try meditation or a creative outlet that you love to do.
  • Get plenty of sleep to refresh and renew your body for the new day.
  • Take time to discover new things each day that bring meaning, purpose and joy into your life.

As you work with these ideas, reflect on how these simple strategies can reduce your stress and improve the health of your body, mind and spirit.

What have you tried recently to improve your resilience? Please share what has worked for you.

 

http://www.mayoclinic.org/expert-blog/bgp-20150361

domingo, 6 de setembro de 2015

For diabetes in obesity, weight-loss surgery beats medication

 

Friday, September 4, 2015

 By Anne Harding

(Reuters Health) – Weight-loss surgery beats medication for controlling type 2 diabetes in obese people, according to the longest-term trial ever to compare the two approaches.

Half of the patients treated with weight-loss surgery in the study were diabetes-free at five years, said Dr. Francesco Rubino of Kings College London in the UK and colleagues in a report in The Lancet.

“The five-year mark is an important mark in many diseases,” Dr. Rubino told Reuters Health by phone. “The fact that some patients at five years are basically disease-free is a remarkable finding.”

In 2009, he and his colleagues randomly assigned 20 obese patients with type 2 diabetes to receive medical treatment, 20 to receive a type of weight-loss surgery called a gastric bypass, and another 20 to undergo a weight-loss operation called a biliopancreatic diversion.

Eighty percent of patients who had surgery had their blood sugar under good long-term control, versus about 25 percent of patients treated with drugs only.

All of the study groups had a reduction in cardiovascular risk. But the surgery-treated patients had a 50 percent lower risk of heart and blood vessel disease than those treated with drugs only, and they needed fewer drugs for treating high blood pressure or high cholesterol.

The improvements in blood sugar control and heart disease risk weren’t related to how much weight patients lost.

“What really is causing the remission of diabetes after surgery remains mysterious,” Dr. Rubino said. What is known, he added, is that the intestines produce a host of hormones involved in regulating metabolism. Reconstructing the gastrointestinal tract so that food bypasses the stomach and small intestine may help restore normal metabolic control, he explained.

Like any surgery, weight loss operations carry risks. An international study published earlier this, for example, found that after two years, people randomized to have gastric bypass surgery had better control of their type 2 diabetes than people assigned to a medication group, but they also had a higher risk for infections and bone fractures. (See Reuters Health story of May 21, 2015.)

And some patients may gain back some of the weight they lost.

Still, doctors are increasingly referring to this type of surgery as “diabetes surgery,” rather than obesity surgery, said Dr. Philip Schauer, the director of the Cleveland Clinic Bariatric and Metabolic Institute and a bariatric surgeon, in a telephone interview with Reuters Health. Dr. Schauer did not participate in the new study.

“There are some people, this study shows, that can go into remission for up to five years or more,” he said. “We hesitate to use the word ‘cure,’ but it’s pretty darn close to a cure, about as close to a cure as you can get.’”

Dr. Schauer pointed out that about half of patients with type 2 diabetes are unable to control their blood sugar with medication and lifestyle measures. Based on the new findings, he said, bariatric surgery should be offered to these patients if they are moderately obese, for example with a body mass index (BMI) of 35. (BMI is a measure of weight in relation to height.)

Currently the National Institutes of Health states that patients should have a BMI of 40, or a BMI of 35 with obesity-related illness, such as type 2 diabetes, in order to be eligible for weight loss surgery.

“There are still many insurance companies today that will not pay for this surgery for any reason, whether it’s for obesity or diabetes. It means that they are denying people effective treatment,” Dr. Schauer said. “This study is going to make insurance carriers and third party payers rethink their coverage policies regarding bariatric or diabetes surgery, as we prefer to call it.”

SOURCE: http://bit.ly/1JTRaqX The Lancet, online September 3, 2015.

 

New medical device concept could reduce time to diagnose infections

 

 

An artist's rendition of the DOTS qPCR device.

Credit: Dustin Harshman

When a patient arrives at a hospital with a serious infection, doctors have precious few minutes to make an accurate diagnosis and prescribe treatment accordingly. Doctors' ability to act quickly and correctly not only makes a difference to the patient's outcome, it determines whether the infection spreads to other patients in the clinic, and can even contribute to the development of drug-resistant bacteria.

Luckily for patients and doctors alike, a new diagnostic device created by collaborative team of UA engineers and scientists may significantly reduce the amount of time necessary to diagnose tissue infections. The device's novel approach to molecular diagnostics, called DOTS qPCR, is faster, more efficient and less expensive than alternatives currently being used in clinics. The work is described online in the journal Science Advances.

"We have developed a completely different type of system than what exists out on the market," said Dustin Harshman, a former graduate student in the Biomedical Engineering Graduate Interdisciplinary Program, currently a scientist at Ventana Medical Systems. "We want to see physicians get diagnostic information more rapidly and prescribe better initial therapies."

Pathogens and infectious diseases are typically detected using a technique called polymerase chain reaction, or PCR. The method involves rapidly heating and cooling DNA molecules from a biological sample in a process called thermal cycling. This results in the amplification of the target DNA into millions, and even billions of copies. Scientists and physicians can then use the copies to identify the type of pathogen causing the infection. The problem is that most PCR tests can take up to an hour or more, and a physician's decision-making window is typically less than ten minutes.

"With DOTS qPCR we are able to detect amplification and identify the infection after as few as 4 thermal cycles, while other methods are working with between 18 and 30," said Jeong-Yeol Yoon, a professor in the Department of Agricultural and Biosystems Engineering and a joint appointment in the Department of Biomedical Engineering. "We can get from sample to answer in as little as 3 minutes and 30 seconds."

DOTS qPCR, invented by Yoon and his research group, stands for droplet-on-thermocouple silhouette real-time PCR. The technology relies on the measurement of subtle surface tension changes at the interface of a water droplet suspended in an oil medium. The water droplet, which contains the target DNA to be amplified, is moved along a heat gradient in the oil to begin the chain reaction. As more copies of the target DNA are produced, they move towards the oil-water interface, resulting in measurable changes in surface tension. Remarkably, the size of the droplet can be measured using a smartphone camera, providing a method to observe the course of the reaction in real time.

"What's interesting about the way we approached this is that we've developed a deep understanding of what's happening at a molecular level in our system," said Harshman, who initially struggled to determine how to monitor the course of the reaction. "That kind of understanding gave us the ability to figure out why it was failing, and then leverage that failure as an advantage to create a completely new method."

In addition to much faster diagnosis times, the system does not require samples to be completely free of other contaminants. This can save valuable time otherwise spent preparing samples for testing.

"The system still works with relatively dirty samples," said Yoon. "We can use very minimal processing and still make the detection in a short time."

Yoon emphasized that DOTS qPCR is inexpensive compared to its counterparts, which employ costly and time-intensive testing methods involving fluorescence detection, lasers and dark chambers.

"It's easy to use, smartphone-integrated and saves money and labor using expensive equipment," explained Yoon. "This technology has a lot of commercial potential, and we'd be happy to work with industry to bring it to market."

DOTS qPCR also has major applications in biological research, where PCR is an indispensable tool used in studying everything from hereditary disease to the evolutionary tree. Ultimately, Harshman and Yoon hope the technology will transform the operations of hospital emergency rooms, where saving time to diagnosis translates into saving lives.

"We're envisioning a device that will provide physicians with answers as soon as they perform a biopsy, while they're still sitting with the patient," said Harshman. "By saving diagnosis time, we can decrease complications for patients, isolate infections to prevent spreading, and avoid creating selective pressure for antibiotic-resistant bacteria, which is a huge burden on the medical system."


Story Source:

The above post is reprinted from materials provided by University of Arizona. The original item was written by Raymond Sanchez. Note: Materials may be edited for content and length.


Journal Reference:

  1. D. K. Harshman, B. M. Rao, J. E. McLain, G. S. Watts, J.-Y. Yoon. Innovative qPCR using interfacial effects to enable low threshold cycle detection and inhibition relief. Science Advances, 2015; 1 (8): e1400061 DOI:10.1126/sciadv.1400061


University of Arizona. "New medical device concept could reduce time to diagnose infections." ScienceDaily. ScienceDaily, 4 September 2015. <www.sciencedaily.com/releases/2015/09/150904194857.htm>

 

A new sensor system enables researchers to know the risk of corrosion in reinforced concrete structures in real time

 

 

Researchers of the Universitat Politècnica de València have developed a new sensor system able to quickly and non-destructively detect the risk of corrosion in the concrete structure of buildings and do so when the first symptoms appear.

The information provided by this system, which has been patented by the UPV, is of particular significance for building safety. It enables any necessary intervention to be made sufficiently in advance, reducing, at the same time, repair and maintaining costs.

The system also includes a pulse voltammetry unit, which provides information on the intensity of the corrosion for every point in the network of sensors of the structure analysed, and specific software for analysing the electrical response from each sensor.

Today, the most common way to determine the corrosion speed of the rebars in a reinforced concrete structure is based on destructive techniques, for which it is necessary to expose the rebars at a certain distance in order to electrochemically measure the intensity of the corrosion. It is then necessary to repair the area with mortars.

Its benefits include a reduction in the time and cost of the diagnosis of the structure. In addition, it is able to register in real time the state of maintenance and the speed of corrosion of the rebars at several points of the structure, even in non-accessible areas.

Application

The system could be installed both in new constructions and restoration projects. In the first case, it must be incorporated when the concrete is poured in those areas of the structure most exposed to corrosion caused by humidity, carbon dioxide or chlorides, among others. In restoration projects, it permits a non-destructive control and monitoring of the effectiveness of the restoration.

Miguel Alcañiz, Román Bataller, José Manuel Gandía, José Enrique Ramón and Juan Soto, researchers at the Centre for Molecular Recognition and Technological Development (IDM, in Spanish), together with Manuel Valcuende, from the Grupo de Recuperación del Patrimonio Cultural of the Universitat Politècnica de València have taken part in the development of this project.


Story Source:

The above post is reprinted from materials provided by Asociación RUVID.Note: Materials may be edited for content and length.


Asociación RUVID. "A new sensor system enables researchers to know the risk of corrosion in reinforced concrete structures in real time." ScienceDaily. ScienceDaily, 4 September 2015. <www.sciencedaily.com/releases/2015/09/150904121626.htm>